Caractéristique des unités du réseau SAND

Active sites

obsand-cosmolab present

Appareilssand-2-ommLPRad-1-omm
OrdinateurAcer veriton???Acer veriton
Systèmes pris en chargewebcam-skyLXD-75 mount
 webcam-mountLPRad-1-omm
 sand-2-ommpowerusb32
 Sondes thermiques 
IP interne192.168.0.100192.168.0.200
Ports externes2080 20222180 2122
URL  
  • Coordonnées= 45° 25 23.24 N ; 71° 7 32.86 O
  • IP local=192.168.1.200
  • IP distant=132.204.61.229
  • Passerelle=192.168.1.1

LPRad-1-omm

  • Commande observe:
nohup observe -i ph -a sun -d 60 &
[$[Get Code]]
  • Fichier observation_sequence
90 0 90 0 sky 100
[$[Get Code]]
  • Liste des prises powerusb (depuis réaménagement de 2012)
    1. CCD PLRad-1
    2. CCD SAND-2-OMM
    3. Nothing
  • Fichier localconfig
# localconfig file for sand
# please be shure to put a line for the observation command without any comments.
nohup observe -i ph -a sun -d 60 &
powerusbport 1 # powerusb outlet to which CCD is connected
powerusbversion 32 # can be 32 of 64 depending on CPU arch
cammodel1 none # Observatory and ambient brightness monitoring cam. Can be linksys d
link IPVideo9100A or none
cammodel2 none # Sky monitoring cam. Can be linksys dlink IPVideo9100A raspberry-pi
or none
cam2pwrusbport 1 # powerusb outlet to which sky cam is connected
darkness_threshold 100 # darkness level threshold for cam1
mountmodel none # mount model. Can be LXD-75 , PT785S+Pololu or none
Longitude-W 71 7 33 # longitude of the observation site
Latitude-N 45 25 23 # latitude of the observation site
elev_sealevel 592 # site altitude relative to sea level (m)
Site_name Cosmolab # name of the observation site
[$[Get Code]]

sand-2-omm

  • Commande observe:
nohup observe -a ast &
[$[Get Code]]
  • Programm webcamimg has been modified in /usr/local/bin to replace 192.168.1 by 192.168.0 to be compatible with this version of router configs.
  • Fichier observation_list
El_deg El_min Az_deg Az_min Im_typ In_tim
90 0 0 90 0 0 sky 14400
90 0 0 90 0 0 dark 14400
[$[Get Code]]
  • Fichier localconfig
# localconfig file for sand
# please be shure to put a line for the observation command without any comments.
nohup observe -a ast &
powerusbport 1 # powerusb outlet to which CCD is connected
powerusbversion 32 # can be 32 of 64 depending on CPU arch
cammodel1 linksys # Observatory and ambient brightness monitoring cam. Can be linksys dli
nk IPVideo9100A or none
cammodel2 none # Sky monitoring cam. Can be linksys dlink IPVideo9100A or none
cam2pwrusbport 1 # powerusb outlet to which sky cam is connected
darkness_threshold 128 # darkness level threshold for cam1
mountmodel none # mount model. Can be LXD-75 , PT785S+Pololu or none
elev_gain 10.32 # servo_pos = gain * angle(deg) + offset
elev_offset 5990 #
elev_channel 1 # pololu channel to which elevation servo motor is connected
azim_gain -10.167 # servo_pos = gain * angle(deg) + offset
azim_offset 7660 #
azim_channel 0 # pololu channel to which azimuth servo motor is connected
Longitude-W 71 7 33 # longitude of the observation site
Latitude-N 45 25 23 # latitude of the observation site
Site_name Cosmolab # name of the observation site
spectral_calib spectral-calib-SAND-2_OMM-2011.txt # name of the spectral calibration file (to be located in /home/sand/sv
n/trunk/Calib_files)
photometric_calib photometric-calib-SAND-2_OMM.txt # name of the photometric calibration file (to be located in /home/sand
/svn/trunk/Calib_files)
[$[Get Code]]

Universidad Complutense de Madrid present

Dept. Astrofisica, Fac CC Fisicas, Madrid (Spain)

  • Date d'installation: 29 juillet 2013
  • Date de rehaussement/réparation: 14 janvier 2015
  • google maps
  • Instrument: SAND-4A
  • URL=ucmadrid.obsand.org
  • ports= 2080 2022
  • Commande observe:
nohup observe -a sun -d 45 &
[$[Get Code]]
  • Fichier observation_list
El_deg El_min Az_deg Az_min Im_typ In_tim
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 sky 300
90 0 0 90 0 0 dark 300
[$[Get Code]]
  • Liste des prises powerusb (depuis réaménagement de 2015)
    1. night camera & IPVideo server
    2. CCD
    3. day camera
  • Powerusb version
    • powerusb32
  • Fichier localconfig
# localconfig file for sand
# please be shure to put a line for the observation command without any comments.
nohup observe -a sun -d 45 &
powerusbport 2 # powerusb outlet to which CCD is connected
powerusbversion 32 # can be 32 of 64 depending on CPU arch
cammodel1 dlink # Observatory and ambient brightness monitoring cam
. Can be linksys dli
nk IPVideo9100A or none
cammodel2 IPVideo9100A # Sky monitoring cam. Can be linksys dlink IPVideo9
100A or none
cam2pwrusbport 1 # powerusb outlet to which sky cam is connected
darkness_threshold 128 # darkness level threshold for cam1
mountmodel PT785S+Pololu # mount model. Can be LXD-75 , PT785S+Pololu or non
e
elev_gain 10.32 # servo_pos = gain * angle(deg) + offset
elev_offset 5990 #
elev_channel 1 # pololu channel to which elevation servo motor is
connected
azim_gain -10.167 # servo_pos = gain * angle(deg) + offset
azim_offset 7660 #
azim_channel 0 # pololu channel to which azimuth servo motor is co
nnected
Longitude-W 03 43 34 # longitude of the observation site
Latitude-N 40 27 04 # latitude of the observation site
elev_sealevel # site altitude relative to sea level (m)
Site_name Observatorio-UCM # name of the observation site
spectral_calib spectral-calib-OBSAND-4A-06-01-2015.txt # name of the spectral calibration file (to be loca
ted in /home/sand/sv
n/trunk/Calib_files)
photometric_calib photometric-calib-SAND-4A-05-01-2015.txt # name of the photometric calibration file (to be l
ocated in /home/sand
/svn/trunk/Calib_files)
[$[Get Code]]

Montsec Cataluna, Spain present

  • Date d'installation: 25 janvier 2015
  • Instrument: SAND-4B
  • URL=montsec.obsand.org
  • local ip 192.168.223.10
  • ports= 2080 2022
  • google maps
  • Commande observe:
nohup observe -i sp -a sun -d 15 &
[$[Get Code]]
  • Fichier observation_list
El_deg El_min Az_deg Az_min Im_typ In_tim
90 0 0 90 0 0 dark 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
90 0 0 90 0 0 sky 7200
[$[Get Code]]
  • Liste des prises powerusb
    • Damaged powerusb has been replaced by a timer shutting off and on around 17h local time
  • Powerusb version
    • nil
  • Fichier localconfig
# localconfig file for sand
# please be shure to put a line for the observation command without any comments.
nohup observe -a sun -d 15 &
powerusbport 3 # powerusb outlet to which CCD is connect
ed
powerusbversion 32 # can be 32 of 64 depending on CPU arch
cammodel1 dlink # Observatory and ambient brightness moni
toring cam. Can be linksys dli
nk IPVideo9100A or none
cammodel2 IPVideo9100A # Sky monitoring cam. Can be linksys dlin
k IPVideo9100A or none
cam2pwrusbport 2 # powerusb outlet to which sky cam is con
nected
darkness_threshold 128 # darkness level threshold for cam1
mountmodel PT785S+Pololu # mount model. Can be LXD-75 , PT785S+Pol
olu or none
elev_gain 10.32 # servo_pos = gain * angle(deg) + offset
elev_offset 5990 #
elev_channel 1 # pololu channel to which elevation servo
motor is connected
azim_gain -10.167 # servo_pos = gain * angle(deg) + offset
azim_offset 7660 #
azim_channel 0 # pololu channel to which azimuth servo m
otor is connected
Longitude-W 359 15 50 # longitude of the observation site
Latitude-N 42 01 28 # latitude of the observation site
elev_sealevel 800 # site altitude relative to sea level
Site_name Montsec-COU # name of the observation site
spectral_calib spectral-calib-OBSAND-4B-06-01-2015.txt # name of the spectral calibration file
(to be located in /home/sand/sv
n/trunk/Calib_files)
photometric_calib photometric-calib-SAND-4B-05-01-2015.txt # name of the photometric calibration fil
e (to be located in /home/sand
/svn/trunk/Calib_files)
[$[Get Code]]

Universitat de Barcelona, Barcelona Spain present

  • Google maps
  • Installation date: 14 September 2016
  • Instrument: SAND-4C
  • Coordinates= 41deg 23min 5.2sec, 2deg 7min 4.9sec (41.384766, 2.118023)
  • http://vpn.ub.edu/

Dome @ Saint-Camille, Québec, Canada present

  • Google maps
  • Installation date: In progress
  • Instruments: SAND-5A (Installed)
  • Other instruments:
    • TESS (stars60) from the STARS4ALL european project (Installed)
    • SQM-LE (Installed)
    • Co-SQM
  • Coordinates= 45deg 44min 4.9sec, -71deg 40min 34.5sec (45.734629, -71.676250)
  • Img:PanneauSaintCamille.jpg
  • local ip computer for SAND-5A 192.168.1.100 port: 2022 8022
  • local ip SQM-LE: 192.168.1.103 port: 10001 10001
  • local ip TESS: 192.168.1.123 port: 2380 2380
  • router ip: 192.168.0.10
  • data from TESS graphiques dernière nuit
  • data from SQM
  • Liste des prises powerusb (depuis réaménagement de 2015)
    1. nothing
    2. nothing
    3. CCD
  • Powerusb version
    • powerusb32

Old sites

University of Hong Kong

  • University of Hong Kong installation: May 23 2016
  • IMPORTANT: This instrument use an older version of the software not making use of localconfig file.
  • site google maps
  • site=HKU
  • site Coordinates= 245 51 36 W 22 16 59 N (22.283076, 114.13991831)
  • IP=nil
  • URL=hku.obsand.org
  • ports= 2080 2022
  • Appareil=sand-3b
  • SAND-3b have been transfered from Hefei to HKU in spring 2016
  • Fichier observation_list
Longitude-W 245 51 36
Latitude-N 22 16 59
Site_name HKU
El_deg El_min Az_deg Az_min Im_typ In_tim
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 dark 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
90 0 0 0 sky 600
[$[Get Code]]
  • Commande observe:
nohup observe -a sun -d 60 &
[$[Get Code]]

obsand-udes moved to Hefei, China on 2012/2/22

  • google maps
  • site=Observatoire SIRENE Université de Sherbrooke, Qc
  • Coordonnées=45° 22 25.54 ; N 71° 55 23.18 O
  • IP=132.210.230.101
  • URL=obsand-udes.no-ip.org
  • ports= 2080 2022
  • Appareil=sand-3b

obsand-hefei moved to University of Hong Kong on May 23 2016

  • site google maps
  • site=AIOFM, Hefei, Chine
  • site Coordinates= 31° 54 8.69 N ; 117° 9 48.48 E
  • IP=nil
  • URL=nil
  • ports= 2080 2022
  • Appareil=sand-3b (sand-3a is dead!!!)
  • SAND-3b have been transfered from Linan to Hefei on 2012/2/22
  • data
$StopWatch